Info
HOT-Patching Systems
What is HOT-Patching?
HOT Patching enables the user to change or switch the
allocation between light and dimmer channel as required
on the dimmer output side. A distinction is made between
Soft(ware)-Patch and HOT-Patch. In the case of the soft
patch the dimmer channel is patched in the selection.
However, as usually a number of consumers are connec-
ted to one dimmer channel, this solution does not provi-
de the optimal result when configuring the lighting
system. In this case the use of a HOT-Patch is recommen-
ded. CONNEX HOT-Patch pads use 3 pole connectors of
the GST series with a leading protective conductor
contact. The GST series is shock protected and can be
plugged in under load. Upon request, the patch pads are
still available in the old ST standard. We distinguish bet-
ween 2 types of HOT patching systems:
1. Combination systems : Dimmer output (F) and light
input (M) in one patch pad.
2. Individual systems: Dimmer output panels (F) and light
input pads separate in a number of patch pads.
Bonding pads
ANS CONNEX bonding pads wired on multicore, with free end
For rack fitting
Shock protection due to closed housing
Description
Article code
ANS pad 6x HAN E 10pole (F) 1,5m, 3U
12302002
ANS pad 6x HAN E 16pole (F) 1,5m, 3U
12302015
ANS pad 12x safety plug, 1,5m, 3U
12302006
ANS pad 6x safety plug, 1,5m, 2U
12302017
ANS CONNEX bonding pads unwired
For rack fitting
Without housing
Connectors are mounted but not wired
ANS CONNEX bonding pads wired on multicore with HARTING HAN E male
For rack fitting
Shock protection due to closed housing
Description
Article code
ANS pad 6x HAN E 10pole, 3U
12301000
ANS pad 6x HAN E 16pole, 3U
12301001
ANS pad 12x safety plug, 3U
12301004
Description
Article code
ANS pad 6x HAN E 10pole (F) into HAN E 10pole (M), 1,5m, 3U
12302003
ANS pad 6x HAN E 16pole (F) into HAN E 16pole (M), 1,5m, 3U
12302016
ANS pad 12x safety plug into HAN E 16pole (M), 2x 1,5m, 3U
12302005
ANS pad 6x safety plug into HAN E 16pole (M), 1,5m, 2U
12302019